Settings and configuring Scan and Transfer

Access the Settings in LinkTo for C72 a User may configure and toggle a number of options available including the output from the Scan and Transfer feature.

1. Blacklist File Location – The path where the file blacklist.csv is saved. A blacklist file contains the tags that the user wants to be blacklisted/not read.
2. Audio Sound Indicator – When this setting is on, the application will play a beep sound to indicate that a tag has been scanned.
3. Turn Off Device After Scanning – This feature is not applicable for SensaLab Linkto for C72.
4. Sync Blacklist File
5. Transfer to Application – This determines the format that will be used when Scan and Transfer is used:
   1. Select the data that you want to transfer e.g TagID
   2. Select the separator that you want in case you want to transfer scan date. E.g. Tab
   3. Click the + button beside the separator
   4. Repeat this process if you want to transfer scan time.
   5. Example data: TagID<TAB>Date<TAB>Time<ENTER> E2801160200062BB1FF80926 24/01/2020       01:08:03 PM